Dewesoft brings its incredible software to the world of industrial data acquisition with the DS NET line. Combine these multi-function modules in countless ways, providing top notch data recording and process control. DS NET modules are intelligent, and contain the setup that is downloaded from your easy setup within our award winning DEWESoft software, for maximum reliability and determin- istic control.
DS NET hardware has been designed for demanding measurements, as found in today`s most industrial measuring and test environments. The range of applications starts with a single stand-alone system, and ranges all the way up to networked dozens to hundreds of channels, in the fields of component testing, engine testing, process performance testing and structural monitoring.
The programmable intelligence in each module allows the calculation of minima, maxima, data reduction and filtering in each module already. The data buffer memory inside the interface module of 12 MByte guarantees a gap-free data acquisition. This intelligence allows to optimize the data rate for each application.
A wide range of available modules allows optimized solutions for single task applications, such as dynamic signal acquisition up to 10 kS/s, inputs/outputs for all types of signals, galvanic isolation of the inputs and outputs, and high channel count per system.
The Black Line housing can be freely configured for 1 to 16 measurement slots. The flexible backplane is built for any number of slots, and then the modules are inserted from the front side. Modules can be replaced anytime - even during measurement!
The standard modules offer two 10-pin screw connectors. Optional BNC, DB-9 or thermocouple connectors are available, too, depending on the module. The wide range of modules as well as the flexibility of the number of modules per instrument guarantees the best price-performance and size ratio.
For high channel-count applications, which require a 19'' rack solution, we developed a 19'' rack version of all available DS NET modules. Standard 19'' 3 UE rack is configured with 13 module slots. It allows individual channel configuration from 2 to 2000 channels.
Modules can be replaced during measurement without pre-programming. Setup is loaded from the module's backplane.
BNC, DB-9 and T/C thermocouple connector options are available.
8 module DS NET system with standard DSUB9, BNC and 10pin screw connector modules. Systems can be configured in many ways just by adding or replacing existing modules. Standard T/C thermocouple connector module is also available.
Our brake-trough design allows you to quickly replace modules during measurement without pre-programming. Setup is loaded from the module's backplane.
This system uses several DS NET modules in a hi-channel count application.
