I use dewe-box-ca-education and dewesoft 6.6
I want to show heat release in overview in CA scope diagram and went export data the heat release and IMEP TQ TI is zero

And the Crank Angle in math menu I try to use Angle sensor I have but the sensor type is 60-2, 36-2 not show sensor Encoder -1800

Hello,

I guess the first problem is related to Heat Release check box. You have to check heat release check box in CA->Thermodynamics so it will calculate heat release. Then you can see it in the CA Scope and you can export it.

To solve the second problem you have to set CA Math in Angle Domain (Sampling) and connect Encoder-1800 directly to counters.

my program it does not have Thermodynamics tab

but when I use DEMO mode it show this

and this is my setting

enable combustion analysis

when register complete the Thermodynamics and knock detect tab it doesn't appear as the first picture.

Hi again.

Thanks for providing detailed description about your problem. Unfortunately CA BASE license does not allow you to use Thermodynamics and Knock detection. You need CA-OPT1 license in order to use Thermodynamics. To acquire CA-OPT1 license please contact your local dealer to get more details.

You can check for your local dealer in where to buy section or check for the international dealers on Dewetron webpage. You can also contact worldwide sales office at this email: sales(at)dewetron(dot)com.

If you have any further question, just contact us again.

Your sincerely,
DEWESoft

One more thing. If you would like to try out Thermodynamics before you purchase your CA-OPT1 license you can use evaluation license, which will allow you to try full functionality of DEWESoft for limited time.

To generate your evaluation license, please login to our website and follow this link.

Hope this helps you.

Best regards,
DEWESoft